THIN CUTTING FRAME SAW TYPE MAMUTH WITH WARRANTY AND INSTALLATION
ONLY 292 HOURS OF RUN TIME
The MAMUTH Thin-Cutting Frame Saw was developed for cutting solid wood blocks into glueable slats with a minimum of saw kerf waste. The Mamuth is a heavy duty frame saw which has a maximum width of 200 mm and maximum height of 250 mm.
TECHNICAL DATA
- Voltage 415V 60 hZ unless otherwise specified
- Main Motor 22 kW (30 HP)
- Feeding Speed 0.3-1.5 m/min
- Strokes of the Saw Frame 250 mm (10”)
- Strokes per minute 450 strokes/min
- SEQ CHAPTER h r 1 Cutting Height Adjustable 80 - 250 mm
- Cutting Width with center guide 2 x 25 mm to 90 mm
- Min. Block Length 300 mm
- Minimum Slat Thickness 2.5 mm (depending on cutting height)
- Cutting Accuracy approx. + / - 0.3 mm
- Saw Kerf 1.35 mm
- Saw Blade Life-Stellite Saws approx. 10 - 20 hrs.
- Dust Hood Diameter 1 x 120 mm top 1 x 160 mm bottom
- Machine Dimensions L 3300 mm x W 1000 mm x H 2300 mm
- Machine Weight 4,700 kg or 10,340 lbs
Machine is equipped with:
1 x Setup frame change device with dial indicator and lineal slide system
2 x Saw frames for cutting 250 mm - 10" high (unless otherwise specified)
2 x Complete sets of spacers (according to customer’s size requirements)
10 x Complete sets of Saw Blades and Hoggers (according to customer’s size requirements)
1 x Precision torque wrench (200 Nm)
1 x Adjustable chip breaker
1 x Air blast system
Automatic raise lower of the top feed rollers via photo sensor
Digital feed speed indicator
Automatic opening of the machine for frame removal
Automatic central lubricating system
Driven feed rollers top and bottom