Wintersteiger Reconditioned DSG150 ECO

RECONDITIONED WINTERSTEIGER THIN CUTTING FRAME SAW TYPE DSG 150 ECO WITH 10" CUTTING HEIGHT

This machine was made in 2001 and only has 4,000 hours of run time

The DSG 150 thin-cutting frame saw cuts solid wood blocks into glueable slats with a minimum of saw curve waste. The machine has a sturdy, durable and maintenance friendly design.

Center guides are fitted on the basic machine guaranteeing the widest possible range of application.

Two (2) Saw Frames included.

TECHNICAL DATA

• Voltage 480 V 60 HZ
• Main Motor 11 kW (15 Hp)
• Feeding Speed 0.3-1.5 m/min
• Stroke of the Saw Frame 210 mm
• Strokes per minute 450 strokes/min
• Cutting Height Adjustable 50-250 mm
• Cutting Width Center Guide 2 x 30-70 mm
• Min. Block Length 300 mm
• Minimum Slat Thickness 1.5 mm
• Cutting Accuracy approx. + / - 0.2 mm
• Saw Kerf 1.25 - 1.4 mm
• Saw Blade Life-Stellite Saws approx. 10-100 hrs.
• Dust Hood Diameter 3 x 120 mm
• Machine Dimensions L 3500 mm x W 700 mm x H 1900 mm
• Machine Weight 4,500 lbs.

Machine is equipped with:

• 2 x Saw Frame 550 DSG 150 ECO (for max cutting height 10")
• Mounting Frame DSG 150 ECO (to tension saw frame)
• 2 x Complete sets of Spacers (according to customers requirements)
• 2 x Complete sets of Saw Blades
• Precision Torque Wrench (200 mm)
• Oil lubricating system
• Air-Jet Module to clean dust from slats
• Machine can come with installation "if required"

Adobe Flash Player not installed or older than 9.0.115!