Used Frame Saw type Mamuth

PrintE-mail

THIN CUTTING FRAME SAW TYPE MAMUTH WITH WARRANTY AND INSTALLATION

ONLY 292 HOURS OF RUN TIME

Mamuth2

Mamuthweb1

 

 

The MAMUTH Thin-Cutting Frame Saw was developed for cutting solid wood blocks into glueable slats with a minimum of saw kerf waste. The Mamuth is a heavy duty frame saw which has a maximum width of 200 mm and maximum height of 250 mm.

JavaScript is disabled!
To display this content, you need a JavaScript capable browser.

TECHNICAL DATA

Voltage 415V 60 hZ unless otherwise specified

Main Motor 22 kW (30 HP)

Feeding Speed 0.3-1.5 m/min

Strokes of the Saw Frame 250 mm (10”)

Strokes per minute 450 strokes/min

SEQ CHAPTER h r 1 Cutting Height Adjustable 80 - 250 mm

Cutting Width with center guide 2 x 25 mm to 90 mm

Min. Block Length 300 mm

Minimum Slat Thickness 2.5 mm (depending on cutting height)

Cutting Accuracy approx. + / - 0.3 mm

Saw Kerf 1.35 mm

Saw Blade Life-Stellite Saws approx. 10 - 20 hrs.

Dust Hood Diameter 1 x 120 mm top 1 x 160 mm bottom

Machine Dimensions L 3300 mm x W 1000 mm x H 2300 mm

Machine Weight 4,700 kg or 10,340 lbs

Machine is equipped with:

1 x Setup frame change device with dial indicator and lineal slide system

2 x Saw frames for cutting 250 mm - 10" high (unless otherwise specified)

2 x Complete sets of spacers (according to customer’s size requirements)

10 x Complete sets of Saw Blades and Hoggers (according to customer’s size requirements)

1 x Precision torque wrench (200 Nm)

1 x Adjustable chip breaker

1 x Air blast system

Automatic raise lower of the top feed rollers via photo sensor

Digital feed speed indicator

Automatic opening of the machine for frame removal

Automatic central lubricating system

Driven feed rollers top and bottom

Normal 0 false false false MicrosoftInternetExplorer4

The MAMUTH Thin-Cutting Frame Saw was developed for cutting solid wood blocks into glueable slats with a minimum of saw kerf waste. The Mamuth is a heavy duty frame saw which has a maximum width of 200 mm and maximum height of 250 mm.

TECHNICAL DATA

Voltage 415V 60 hZ unless otherwise specified

Main Motor 22 kW (30 HP)

Feeding Speed 0.3-1.5 m/min

Strokes of the Saw Frame 250 mm (10”)

Strokes per minute 450 strokes/min

SEQ CHAPTER h r 1 Cutting Height Adjustable 80 - 250 mm

Cutting Width with center guide 2 x 25 mm to 90 mm

Min. Block Length 300 mm

Minimum Slat Thickness 2.5 mm (depending on cutting height)

Cutting Accuracy approx. + / - 0.3 mm

Saw Kerf 1.35 mm

Saw Blade Life-Stellite Saws approx. 10 - 20 hrs.

Dust Hood Diameter 1 x 120 mm top 1 x 160 mm bottom

Machine Dimensions L 3300 mm x W 1000 mm x H 2300 mm

Machine Weight 4,700 kg or 10,340 lbs

Page 2

Machine is equipped with:

1 x Setup frame change device with dial indicator and lineal slide system

2 x Saw frames for cutting 250 mm - 10" high (unless otherwise specified)

2 x Complete sets of spacers (according to customer’s size requirements)

10 x Complete sets of Saw Blades and Hoggers (according to customer’s size requirements)

1 x Precision torque wrench (200 Nm)

1 x Adjustable chip breaker

1 x Air blast system

Automatic raise lower of the top feed rollers via photo sensor

Digital feed speed indicator

Automatic opening of the machine for frame removal

Automatic central lubricating system

Driven feed rollers top and bottom