Thin Cutting Frame Orbit Used
Thin Cutting Frame Saw Type Orbit (Reconditioned) LIKE NEW
The Orbit Thin-Cutting Frame Saw was developed for cutting solid wood blocks into glueable slats with a minimum of saw kerf waste. The Orbit utilizes a unique up/down method of movement for cutting veneer slats. Unlike conventional frame saws that move up and down in a lineal motion, the Orbit uses a patented swing-out motion at the bottom of the saw stroke.
TECHNICAL DATA
Voltage 480 V 60 HZ
Main Motor 15 kW
Feeding Speed 0.3-1.5 m/min
Strokes of the Saw Frame 210 mm
Strokes per minute 450 strokes/min
TECHNICAL DATA
Cutting Height Adjustable 45 - 250 mm (10”)
Cutting Width with center guide 2 x 25 mm to 70 mm
Cutting Width with side guide 1 x 60 mm to 150 mm
Min. Block Length 300 mm
Minimum Slat Thickness 2.5 mm (depending on cutting height)
Cutting Accuracy approx. + / - 0.2 mm
Saw Kerf 1.25 at 4" or less 1.35 at 4" or more.
Saw Blade Life-Stellite Saws approx. 10 - 60 hrs.
Dust Hood Diameter 1 x 120 mm top 1 x 160 mm bottom
Machine Dimensions L 2600 mm x W 800 mm x H 1700 mm
Machine Weight 3,300 kg or 7,200 lbs
Machine is equipped with:
1 x Setup frame change device with dial indicator and lineal slide system
2 x Saw frame - cutting height to be determined by customer
2 x Complete sets of spacers (according to customer’s size requirements)
2 x Complete sets of Saw Blades and Hoggers (according to customer’s size requirements)
1 x Precision torque wrench (200 Nm)
1 x Adjustable chip breaker
1 x Air blast system
Automatic raise lower of the top feed rollers via electrical push button
Digital feed speed indicator
Automatic opening of the machine for frame removal
Automatic central lubricating system
Driven feed rollers top and bottom
