Thin Cutting Frame Orbit Used

Thin Cutting Frame Saw Type Orbit (Reconditioned) LIKE NEW

The Orbit Thin-Cutting Frame Saw was developed for cutting solid wood blocks into glueable slats with a minimum of saw kerf waste. The Orbit utilizes a unique up/down method of movement for cutting veneer slats.  Unlike conventional frame saws that move up and down in a lineal motion, the Orbit uses a patented swing-out motion at the bottom of the saw stroke.

Adobe Flash Player not installed or older than 9.0.115!

TECHNICAL DATA

Voltage                                                             480 V  60 HZ

Main Motor                                                      15 kW

Feeding Speed                                                  0.3-1.5 m/min

Strokes of the Saw Frame                                 210 mm

Strokes per minute                                            450 strokes/min

Cutting Height Adjustable                                  45 - 250 mm (10”)

Cutting Width with center guide                         2 x 25 mm to 70 mm

Cutting Width with side guide                            1 x 60 mm to 150 mm

Min. Block Length                                            300 mm

Minimum Slat Thickness                                    2.5 mm (depending on cutting height)

Cutting Accuracy                                              approx. + / - 0.2 mm

Saw Kerf                                                          1.25 at 4" or less 1.35 at 4" or more.

Saw Blade Life-Stellite Saws                             approx. 10 - 60 hrs.

Dust Hood Diameter                                         1 x 120 mm top 1 x 160 mm bottom

Machine Dimensions L 2600 mm x W 800 mm x H 1700 mm

Machine Weight                                                3,300 kg or 7,200 lbs

Machine is equipped with:

1 x Setup frame change device with dial indicator and lineal slide system

2 x Saw frame - cutting height to be determined by customer

2 x Complete sets of spacers (according to customer’s size requirements)

2 x Complete sets of Saw Blades and Hoggers (according to customer’s size requirements)

1 x Precision torque wrench (200 Nm)

1 x Adjustable chip breaker

1 x Air blast system

Automatic raise lower of the top feed rollers via electrical push button

Digital feed speed indicator

Automatic opening of the machine for frame removal

Automatic central lubricating system

Driven feed rollers top and bottom