CNBS 80 CNC Grinder

About the CNBS 80 CNC Grinder

The CNC Grinder is used for the sharpening of frame saw blades and saw blades which are used in saw mills (resaws). Saw blades up to 8" in width can be ground.

The Grinder has an enhanced software which can be programmed according to the needs of the customer’s band saw requirements, type of wood or green or dry lumber.

(Click play, then click on lower right corner to select language)

Adobe Flash Player not installed or older than 9.0.115!

Advantages of the CNBS 80 CNC Grinder

• Coolant reservoir and flood system
• Roll Support System for easy and accurate feeding
• Easy loading and operation setup
• CNC accuracy with consistent sharpening

Specifications of the CNBS 80 CNC Grinder

• Length of the saw blades: 200 – 1000 mm
• Thickness of the saw blades: 0.5 – 3.0 mm
• Tooth pitch: 3 – 45 mm
• Tooth depth: max. 15 mm
• Face angles: 0° – 30°
• Back tooth angles: 0° – 20°
• Cycle time = max: 50 teeth / min.
• Grinding wheel RPM: 3800 RPM
• Grinding wheel diameter: 150 mm
• Spindle diameter 32 mm
• Grinding wheel width 3 – 6 mm

Motor specifications

• Spindle motor: 0.5 kW
• Servo motors: 0.8 kW
• Pump motor: 0.09 kW

Machine Dimensions

• Width: 1011 mm (40”)
• Length: 1073 mm (42”)
• Height: 1271mm (50”)
• Weight: 400 kg (800 lbs)

CNC Grinder Brochure